![Sad :(](./images/smilies/icon_sad.gif)
I had previously repaired it after her brother broke the bushing, hammer pin, and rear sight blade attempting to clear some sort of "jam"
unfortunately I did not snapa any before pics because I just couldn't let the poor thing set any longer without a good coat of oil. but there were rust freckles all over the upper assembly.
I started out with a good detail srtip, clean, lube and reassemble.
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/IMAG0586.jpg)
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/7d5f038f-2de5-46c4-8e90-89f8f16d412b.jpg)
thenI stripped the bluing with Birchwood casey's "bluing and rust remover"
and gave the metal a good sanding and polish with 800 grit and 00 steel wool.
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/IMAG0588.jpg)
then after a good degreasing I reblued with Birchwood casey's "Super Blue" and touched up later with "perma Blue"
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/IMAG0589.jpg)
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/IMAG0590.jpg)
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/IMAG0591.jpg)
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/IMAG0592.jpg)
![Image](http://i712.photobucket.com/albums/ww121/Bgreenea3/IMAG0595.jpg)
i think it came out quite good.
![approval :thumbs up:](./images/smilies/icon_thumbs%20up.gif)