Shooting .38spl in a .357 revolver
Moderators: Bullseye, Moderators
Shooting .38spl in a .357 revolver
I have been shooting .38 spl ammo in my Ruger Blackhawk .357 for over five years and was told recently by a gun salesman that it wasn't very good for the gun. Is there any truth to this?
If you shoot .38 special in a .357 you get a bathtub ring in the cylinders that gets sticky. As Bullseye said, you need to clean that regularly. I've read that .357 does more damage because of the hotter gasses eroding metal. My guess is you have to shoot a lot of full-house .357 loads to see much damage.
If you are punching holes in paper, the .38 special round is a joy to shoot. A mid-range load doesn't have a lot of recoil or noise and is darned accurate. Of course, throwing a few .357's in and making the guy in the next lane twitch when it goes off is always fun.
If you are punching holes in paper, the .38 special round is a joy to shoot. A mid-range load doesn't have a lot of recoil or noise and is darned accurate. Of course, throwing a few .357's in and making the guy in the next lane twitch when it goes off is always fun.
Were you in the lane next to me? I've been told the same thing a number of times and my 25 year old S&W doesn't seem to have suffered.greener wrote: If you are punching holes in paper, the .38 special round is a joy to shoot. A mid-range load doesn't have a lot of recoil or noise and is darned accurate. Of course, throwing a few .357's in and making the guy in the next lane twitch when it goes off is always fun.
Re: Shooting .38spl in a .357 revolver
Only difference is 1/10 of an inch on the case and .357 are loaded heavier. I have had a S&W 686 that has shot thousands of rounds, and never saw a .357. just 38 Specials
- bearandoldman
- Ye Loquacious Olde Pharte
- Posts: 4194
- Joined: Tue Aug 16, 2005 10:30 am
- Location: Mid Michigan
Have a 50th Anniversary Blackhawk and a Marlin 1894C both chambered in .38/.357 and all I shoot is medium load or factory .38's. Mostly my SWC handloads as they are only used for paper punching, I really do not need any .357 mags, plus I don't care for the extra noise either and neither does Bear.Tbag wrote:True fun as stated, pop-pop-pop-pop-pop-BANG! Watch a big group open up next you, lol.
You have great day and shoot straight and may the Good Lord smile on you.


Re: Shooting .38spl in a .357 revolver
Pretty doggone good pistol out of the box isn't it?ronn wrote:Only difference is 1/10 of an inch on the case and .357 are loaded heavier. I have had a S&W 686 that has shot thousands of rounds, and never saw a .357. just 38 Specials
I shoot 98% 38's thru my S&W 6866", but when I shoot the 2% 357mags,Of course, throwing a few .357's in and making the guy in the next lane twitch when it goes off is always fun.
it's always nice to feel that power! You feel that concussion hitting you like a stiff wind.
Makes the neighbors twitch.
Good point. A cleaning solution that works for me is a 50/50 mix of peroxide and Isopropyl alcohol.Just keep your cylinders clean and free of leading and you shouldn't have any problems.
I soak my cylinder in it for 10 minutes and the residue comes out like liquid mush.
I also use it for the barrel(20 mins), because it dissolves lead as well.
I am hesitant on using it with my blued ruger, but I do, making sure it only contacts
the inside of the barrel. I don't know, but I don't think it would hurt the bluing either.
Haka
Don't let it stay to long before you rinse it outHakaman wrote:I shoot 98% 38's thru my S&W 6866", but when I shoot the 2% 357mags,Of course, throwing a few .357's in and making the guy in the next lane twitch when it goes off is always fun.
it's always nice to feel that power! You feel that concussion hitting you like a stiff wind.
Makes the neighbors twitch.Good point. A cleaning solution that works for me is a 50/50 mix of peroxide and Isopropyl alcohol.Just keep your cylinders clean and free of leading and you shouldn't have any problems.
I soak my cylinder in it for 10 minutes and the residue comes out like liquid mush.
I also use it for the barrel(20 mins), because it dissolves lead as well.
I am hesitant on using it with my blued ruger, but I do, making sure it only contacts
the inside of the barrel. I don't know, but I don't think it would hurt the bluing either.
Haka
http://www.ozoneservices.com/articles/004.htm
- Coach1
- Regular contributor
- Posts: 210
- Joined: Tue Oct 12, 2010 3:09 pm
- Location: Apex North Carolina
misplaced
I think Haka posted that to the wrong thread. It seems to belong to the Misc thread about sharp shooting.. 84 year old Marine.. black hat recipient.. put 3 rounds downrange at 1000 yards.. in a 5 inch group. - all head shots. And I agree.. very impressive at any age.
"You can't always get what you want. But if you try sometimes, you just might find, you get what you need." The Rolling Stones