Tri-Mags for a 10/22...
Moderators: Bullseye, Moderators
Tri-Mags for a 10/22...
Has any of you gents used these Tri-Mags with your 10/22???
http://shopruger.com/BX-1-TriMag-Specia ... nfo/49800/
What due you think of them??? Ruger has them on sale for $50.00. I think I'll get a couple. I am planning on shoot steel with this rifle maybe and they would work out real good for me, if there worth it...
http://shopruger.com/BX-1-TriMag-Specia ... nfo/49800/
What due you think of them??? Ruger has them on sale for $50.00. I think I'll get a couple. I am planning on shoot steel with this rifle maybe and they would work out real good for me, if there worth it...
A lot of people swear the Ruger 10 round rotary mag is the most reliable available. If it's $50 with the three mags I don't think you can go wrong as the cheapest I've ever found the mag was $15 each. If their holder doesn't work you're out $5. (There are some really neat extended mag releases that make it very easy if you even if the holder didn't work)
-
- Advanced contributor
- Posts: 275
- Joined: Sun Jul 25, 2010 10:22 pm
- Location: West Central MO
The first 3 Ruger factory mags I had for the 10/22 were really hard to get in and out. After I carefully sanded/filed (fine grit) the sharp plastic corners at both ends, they worked fine. It seems that there are some really small "feathers" at the corners that I really couldn't see, but could feel with a fingernail. Once that was smoothed up they were fine.lucam wrote:My Ruger magazine sucks.99/100 wrote:A lot of people swear the Ruger 10 round rotary mag is the most reliable available.
I also use some 25 round Butler Creek mags. If you try those, make sure they have the steel lips (they make one that is the same except with plastic lips about 2-3 dollars cheaper, but they don't last long, and then lots of mis-feeds).
-
- Advanced contributor
- Posts: 275
- Joined: Sun Jul 25, 2010 10:22 pm
- Location: West Central MO
Re: Tri-Mags for a 10/22...
I guess they would be OK, I really don't know. I just use the Butler Creek 25 round mags (steel lip ones). They hang down a little lower, but I don't have to change them every 10 rounds.Baldy wrote:Has any of you gents used these Tri-Mags with your 10/22???
http://shopruger.com/BX-1-TriMag-Specia ... nfo/49800/
What due you think of them??? Ruger has them on sale for $50.00. I think I'll get a couple. I am planning on shoot steel with this rifle maybe and they would work out real good for me, if there worth it...
Those tri-mags might be OK though.
Just looking at them, they seem like they could be a nuisance sticking out on both sides. Being pretty well centered between the trigger and forearm, maybe not. I never have tried a Tri-Mag.
I'm happy just changing mags, not much harder than flipping this Tri-Mag around. Some comments about the Ruger mags not working well. All seven of mine had some molding lines and didn't drop so well new, but worked fine after a dozen or so uses.
I'm happy just changing mags, not much harder than flipping this Tri-Mag around. Some comments about the Ruger mags not working well. All seven of mine had some molding lines and didn't drop so well new, but worked fine after a dozen or so uses.
* 2 Ruger Bearcat stainless, w/ EWK ejector housings & Wolff springs
* Ruger SP-101 .22LR, w/ Wolff springs
* 2 NAA Guardian .32ACP
* 3 Zastava M70 .32ACP
* S&W 15-22 Sport (.22LR AR)
* 2 Ruger SR22 .22LR pistols
* Ruger SP-101 .22LR, w/ Wolff springs
* 2 NAA Guardian .32ACP
* 3 Zastava M70 .32ACP
* S&W 15-22 Sport (.22LR AR)
* 2 Ruger SR22 .22LR pistols
- arizona-hermit
- Regular contributor
- Posts: 204
- Joined: Tue Aug 16, 2005 9:01 am
- Location: The Old Southwest
Tri-Mag
Love the lil 10 round rotary mags. HATE the tri-mag idea.
1) to keep dirt.mud.etc,etc,etc, out of the exposed mags, you would have to put a protective cover on them.
2) If you did 1) above, you just gave up your quick load advantage.
Just get a 25,30, or 50 round banana or drum.
Problem solved.
1) to keep dirt.mud.etc,etc,etc, out of the exposed mags, you would have to put a protective cover on them.
2) If you did 1) above, you just gave up your quick load advantage.
Just get a 25,30, or 50 round banana or drum.
Problem solved.
But by the grace of God I am what I am, and His grace toward me did not prove vain. [1 COR 15:10a - NASB]
The idea reminds me of something I did in the 70's.
I wanted more magazine capacity but had no available alternatives. So I rednecked my own. Took 2 standard 10/22 mags and ground the bases flat. Then just Acraglassed the bases together and clamped them. I did that to 4 mags and am still using them nearly 4 decades later.
The only malfunction I have ever had with Ruger 10/22 mags was when I took it apart and didn't assemble it right. I can't fault Ruger or the mags for my goofup. Thats been hundreds of thousands of rounds ago in several 10/22's and still going strong.
Merry Christmas Gentlemen and Gentleladies, I wish each and every one of you health, happiness and the comfort of being surrounded by those you love and those who love you.
Al Schirado
(Stork)
I wanted more magazine capacity but had no available alternatives. So I rednecked my own. Took 2 standard 10/22 mags and ground the bases flat. Then just Acraglassed the bases together and clamped them. I did that to 4 mags and am still using them nearly 4 decades later.
The only malfunction I have ever had with Ruger 10/22 mags was when I took it apart and didn't assemble it right. I can't fault Ruger or the mags for my goofup. Thats been hundreds of thousands of rounds ago in several 10/22's and still going strong.
Merry Christmas Gentlemen and Gentleladies, I wish each and every one of you health, happiness and the comfort of being surrounded by those you love and those who love you.
Al Schirado
(Stork)
"A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.” – George Washington
... about the TriMags ...
I've got a couple of these.
They work fine, but are a little bulky for carrying.
Has anybody bought and used the canvas pockets they sell for these things?
Seems they'd be less troublesome if you could just hook a couple together ... or maybe loop them thru your belt.
Their size makes them just a little 'unhandy' for a shirt or jacket pocket.
... ... just wondering ... ...
They work fine, but are a little bulky for carrying.
Has anybody bought and used the canvas pockets they sell for these things?
Seems they'd be less troublesome if you could just hook a couple together ... or maybe loop them thru your belt.
Their size makes them just a little 'unhandy' for a shirt or jacket pocket.
... ... just wondering ... ...
... Tri-Mag ...
Yeah, might look 'round for something like that. I think I remember seeing a lot of different stuff from when the big 'Obama/CCW' craze first started: everybody seemed to have their own idea about the best way to tote your concealed piece. Most of the bright ideas would appear better-suited for something like the Tri-Mags than for a self-defense shooter.
My 10-22 is 100% stock except for the Weaver scope and a functional sling, but I really enjoy following these threads for ideas and opinions. Guys can get extremely 'hung-up' on a lot of different things ... from golfing or fishing or chasing women or antique cars -to- boozing and honky-tonking ... nothing wrong with enjoying a little 'POW'-time if you can afford it. I've spent more than I need to on several guns ... but I enjoy them and I'm waiting right now for UPS to bring that ol' Winchester 62A I've been itching for.
My 10-22 is 100% stock except for the Weaver scope and a functional sling, but I really enjoy following these threads for ideas and opinions. Guys can get extremely 'hung-up' on a lot of different things ... from golfing or fishing or chasing women or antique cars -to- boozing and honky-tonking ... nothing wrong with enjoying a little 'POW'-time if you can afford it. I've spent more than I need to on several guns ... but I enjoy them and I'm waiting right now for UPS to bring that ol' Winchester 62A I've been itching for.