Sear Pivot Pin

Discuss .22 pistols.

Moderators: Bullseye, Moderators

Post Reply
bingd
New member
New member
Posts: 7
Joined: Sat Jul 26, 2008 1:52 pm
Location: Philippines

Sear Pivot Pin

Post by bingd » Mon Dec 28, 2009 11:28 am

I have detailed strip my Mark lll 678 Ruger. It turned out ok I believed. However, I am a little bit curious of my re-assembly of the sear pivot pin. In my lasts detailed stripping of such pin, I was able to insert it back smoothly, without much effort.

During this last reassembly, I can't insert it smoothly, but with much effort. I have tapped it with a wood pin and rubber mallet. Before insertion I have examined the holes in my frame and the roundness of the sear pivot pin, I believed it is in its original condition.

I have it fired down the range, 200 CCI sub-sonic without a hiccup of any kind.

Do I have to worry or be wary of any eventualities of this abnormality I have encountered in its installation?

User avatar
blue68f100
Master contributor
Master contributor
Posts: 1997
Joined: Mon May 25, 2009 10:31 pm
Location: Piney Woods of East Texas

Post by blue68f100 » Mon Dec 28, 2009 1:31 pm

If I recall on mine one end was deformed just a tad so it did not shift when it was full inserted. I believe the direction to be from left to right with the right end holding the pin.
David

SS MKIII 6 7/8" Fluted Hunter. Mueller Quick Shot, Bushnell 2x Scope, Hogue Rubber Grips
Custom Built 1911

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6384
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Mon Dec 28, 2009 3:12 pm

As long as it stays put you're fine. In the frame, it is fully supported and should not be of any concern.

R,
Bullseye
Image

bingd
New member
New member
Posts: 7
Joined: Sat Jul 26, 2008 1:52 pm
Location: Philippines

Sear Pivot Pin

Post by bingd » Tue Dec 29, 2009 4:57 am

Thanks Sir Bullseye and Blue... Now I can sleep sound with it... FYI Sir Bullseye I am a fan of yours, I have learned everything from you about my Ruger pistols, the Hunter 678 and a 22/45 P4.

You're such a great man for the sport's and one very generous individual as well.

My family and I wishes you a Very Prosperous New Year, Healthy Body and Long Life... Mabuhay and Happy New year to GunTalk-Online.com

Again, Thank You Very Much..

bingd
Philippines :) :) :) :) :)

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6384
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Tue Dec 29, 2009 8:58 am

Thank you for the kind words Bing. I am grateful and humbled by your words. I'm glad that you've learned a lot about your pistols from the posts written here on Guntalk-online. You are correct that my ultimate goal is to promote the sport of shooting and in my mind helping others enjoy their shooting experience is a great way to accomplish this task. May you and your family have all the blessings of a prosperous New Year.

Happy Shooting!

R,
Bullseye
Image

Post Reply