Page 1 of 2
S&W 22A Ejector Replacement
Posted: Tue May 08, 2012 8:28 am
by billspin
Can anyone point me to a manual that I can either download or purchase that will describe the disassembly / assembly steps for replacing the Ejector. I have found instructions for the Slide Insert and the Extractor. I have been having some problems with FTE and would like to replace the Ejector to see if this solves the problem.
Posted: Tue May 08, 2012 8:36 am
by blue68f100
See if this site has what you need.
http://stevespages.com/page7b.htm
Posted: Tue May 08, 2012 8:54 am
by billspin
blue68f100- Thanks for the link. This only shows the Owners Manuals. Still looking for more of a gunsmith's type manual about disassembly / assembly instructions.
Posted: Tue May 08, 2012 1:51 pm
by blue68f100
Bullseye will be along with a procedure.
Posted: Thu Jun 07, 2012 8:14 am
by greener
Posted: Thu Jun 07, 2012 9:14 am
by billspin
Greener, thanks for the reply. But I am after instructions for the Ejector removal (part #2 on the parts drawing). I have gotten the Extractor replacement down pat with only one spring and plunger lost so far. Thanks again and I will still hope someone out there knows how to easily replace the Ejector. Bill
Posted: Thu Jun 07, 2012 11:35 pm
by greener
I've never stripped one to that level but it looks like if you remove the spring plate assembly the ejector will come out if you remove the takedown hammer stop pin.
Posted: Sun Jun 10, 2012 8:47 am
by billspin
greener,
Thanks for the nudge I needed to just get into it and work with the removal. I did just remove the spring plate assembly and it all started to come apart. Got is all stripped down and cleaned, lubed, and ejector replaced. It even works when I put it back together! Not that hard just time consuming and glad I took pictures before I took it apart to review as I put it back together. Thanks again.
Posted: Sun Jun 10, 2012 4:33 pm
by greener
Good!
Posting a picture or two would be great.
Posted: Mon Jun 11, 2012 4:33 pm
by billspin
Greener,
I have a PDF document with pictures of what I did.
Is there a way to upload a document to the forum?
Thanks Bill
Posted: Mon Jun 11, 2012 10:36 pm
by greener
I looked around and didn't see instructions for posting images on the forum. Not hard. Get an account on one of the free image sites like photobucket or picassa web. Photobucket has an image (IMG) code link that pasted here will show up as the photo. On picassa web you use the embed image, no link, and size options. Copy the link and use the Img tag and you get the photo.
Posted: Tue Jun 12, 2012 6:48 am
by Bullseye
Bill has sent me an email with a .pdf document attached concerning his 22A. Once he gives me permission I will place it up on the Guntalk-Online server for all to use.
R,
Bullseye
Posted: Tue Jun 12, 2012 7:33 am
by billspin
Permission Given. Thanks Bill
Posted: Tue Jun 12, 2012 10:53 am
by ruger22
greener wrote:
Interesting photo. Your last family get together in the back yard? ........
Posted: Tue Jun 12, 2012 6:50 pm
by Bullseye
http://guntalk-online.com/images/S&W22A ... sembly.pdf
Here's the link to the 22A disassembly guide.
R,
Bullseye