Page 1 of 1
mark III target pistol
Posted: Wed Jan 19, 2011 11:33 pm
by pekeanje
Is there a way to change the weight of the trigger down to 2lb?
Posted: Thu Jan 20, 2011 6:15 am
by Bullseye
Welcome to GunTalk-Online.
The best way for owners to change their own pistols trigger weight is to install a VQ target sear and VQ target adjustable trigger. These are user friendly drop-in parts that mostly take the time to do a detailed stripping to install. What you get is a 2 pound trigger with less travel for around $50.
R,
Bullseye
Posted: Thu Jan 20, 2011 7:04 am
by pekeanje
Thank you I will look into getting that done
Posted: Thu Jan 20, 2011 9:56 am
by blue68f100
Welcome to Guntalk-Online.
While your at it, you might as well install the Clark MKII Bushing for another $25. This will remove most if not all of the creep from the trigger, and do away with the mag disconnect make it function like a MKII.
If you do not want to buy the trigger you can add pre-travel to your factory trigger. There is a stick covering how to do it. All it takes is a drill press, vice, drill bit, 4-40 tap (or 6-32), and a 3/16" set screw.