mark III target pistol

pekeanje · Post by **pekeanje** » Wed Jan 19, 2011 11:33 pm

Is there a way to change the weight of the trigger down to 2lb?

Post by **Bullseye** » Thu Jan 20, 2011 6:15 am

Welcome to GunTalk-Online.

The best way for owners to change their own pistols trigger weight is to install a VQ target sear and VQ target adjustable trigger. These are user friendly drop-in parts that mostly take the time to do a detailed stripping to install. What you get is a 2 pound trigger with less travel for around $50.

R,
Bullseye

pekeanje · Post by **pekeanje** » Thu Jan 20, 2011 7:04 am

Thank you I will look into getting that done

blue68f100 · Post by **blue68f100** » Thu Jan 20, 2011 9:56 am

Welcome to Guntalk-Online.

While your at it, you might as well install the Clark MKII Bushing for another $25. This will remove most if not all of the creep from the trigger, and do away with the mag disconnect make it function like a MKII.

If you do not want to buy the trigger you can add pre-travel to your factory trigger. There is a stick covering how to do it. All it takes is a drill press, vice, drill bit, 4-40 tap (or 6-32), and a 3/16" set screw.