Note: That several of the parts of the various models are different & the Deckocker only are also slightly different..As well as different recoil rod assemblies & barrel links etc..
This picture thread was made with a 1993 P89 Frame that recieved a Mid 2000s parts kit, The slide break down was done on the original 1993 slide
![Image](http://img806.imageshack.us/img806/8021/rugerp89explodedview.jpg)
Ruger P-89 Disassembly Picture Manual
WARNING If You Don't Have the Propper Skills To Try Any Of This Then You Should Seek Out A Qualified Gunsmith
Do This Of Your Own Risk..
Safety Glasses Should Also Be used as a Few of The Parts are Under Spring Tension & Could Fly Away & Cause Injury To Your Eyes
I am taking the time to make this manual because I couldn't find any information On The P- Series Rugers when I started my "Project P-89"
Maybe in the Future this can help someone else out..
Enjoy!!
Gary
***Safety First** Check Breach For Live Ammo
![Image](http://img821.imageshack.us/img821/3695/1safetycheck.jpg)
Check Magazine For Ammo, On the Ruger You Will Need The Magazine To Push The Ejector Back Up After Reassembly
![Image](http://img291.imageshack.us/img291/2871/2safetychecknoammo.jpg)
Push Down Ejector
![Image](http://img705.imageshack.us/img705/7382/3pushdownejector.jpg)
Pull Slide Back Slightly & Pull Out Slide Relese Rever
![Image](http://img827.imageshack.us/img827/4163/4pulloutslidereleaselev.jpg)
Remove Slide
![Image](http://img825.imageshack.us/img825/6460/5removeslide.jpg)
Remove LH Grip Screw
![Image](http://img547.imageshack.us/img547/9863/6removegripscrewlh.jpg)
Remove RH Grip Screw, Push Slide Release Lever Back In So Frame Will Lay Flat
![Image](http://img716.imageshack.us/img716/3530/7removegripscrewrh.jpg)
Remove Grips by Reaching Inside The Magazine Well & Pushing Them Out
![Image](http://img101.imageshack.us/img101/9994/8removegrips.jpg)
Magazine Catch
![Image](http://img801.imageshack.us/img801/8419/9magazinecatch.jpg)
Remove Magazine Catch
![Image](http://img825.imageshack.us/img825/5216/10removerhmagazinecatch.jpg)
Remove Magazine Catch
![Image](http://img291.imageshack.us/img291/6807/11removingrhmagazinecat.jpg)
RH Magazine Catch Removed
![Image](http://img46.imageshack.us/img46/571/12rhmagazinecatchremove.jpg)
Remove LH Magazine Catch
![Image](http://img295.imageshack.us/img295/7695/13removinglhmagazinecat.jpg)
Remove Magazine Catch Spring by Lifting Up Back & Out Threw Magazine Well
![Image](http://img534.imageshack.us/img534/821/14removemagazinecatchsp.jpg)
Mainspring Plunger Cap, With Hammer in The Not Cock Position Press the Cap onto your workbench hard while pressing out the pin then release SLOWLY
![Image](http://img813.imageshack.us/img813/8669/15mainspringplugpin.jpg)
Removed Mainspring Plunger, Mainspring, & Hammer Strut
![Image](http://img826.imageshack.us/img826/2637/16removingmainspringham.jpg)
Ejector Assembly
![Image](http://img819.imageshack.us/img819/3236/17ejectorassemblypin.jpg)
Pushing Out Ejector Pin, Capture the Spring when you remove the Punch it's under some preasure
![Image](http://img412.imageshack.us/img412/4276/18pushingoutejectorpin.jpg)
Ejector Assembly, Ejector Spring & Ejector Pin Removed
![Image](http://img85.imageshack.us/img85/7944/19ejectorspringandpinre.jpg)
Sear Blocking Lever
![Image](http://img198.imageshack.us/img198/6950/20searblockinglever.jpg)
Sear Pin
![Image](http://img823.imageshack.us/img823/9797/21searpin.jpg)
Pushing Out Sear Pin From Frame
![Image](http://img823.imageshack.us/img823/1593/22pushingoutsearpin.jpg)
Sear, Sear Spring & Pin Removed
![Image](http://img268.imageshack.us/img268/4624/23searpinandspringremov.jpg)
Blocking Lever
![Image](http://img255.imageshack.us/img255/2590/24blockinglever.jpg)
Pushing Out Blocking Lever Pin From Frame
![Image](http://img684.imageshack.us/img684/2930/25pushingoutblockinglev.jpg)
Blocking Lever Pin Removed
![Image](http://img709.imageshack.us/img709/3258/26blockingleverpinremov.jpg)
Hammer Pivot Pin
![Image](http://img28.imageshack.us/img28/5858/27hammerpin.jpg)
Removing Hammer Pivot Pin & Lift Hammer Forward Down Then Up to Remove
![Image](http://img641.imageshack.us/img641/2650/28removinghammerpinandh.jpg)
Hammer & Pivot Pin Removed
![Image](http://img571.imageshack.us/img571/7688/29hammerpinremoved.jpg)
Trigger & Trigger Bar
![Image](http://img512.imageshack.us/img512/6049/30triggertriggerbarands.jpg)
Lifting Slide Stop Lever Retaining Spring
![Image](http://img837.imageshack.us/img837/1413/31liftingslidestoplever.jpg)
Removing Slide Stop Lever
![Image](http://img825.imageshack.us/img825/2243/32removingslidestopleve.jpg)
Removing Trigger & Trigger Bar
![Image](http://img69.imageshack.us/img69/6404/33removingtriggerandtri.jpg)
Driving Out Spring Retainer into frame, Use 1/16" Punch
![Image](http://img194.imageshack.us/img194/1936/34drivingoutspringretai.jpg)
Spring Retainer Removed
![Image](http://img37.imageshack.us/img37/2183/35springretainerremoved.jpg)
Trigger Return Spring Plunger Plug
![Image](http://img338.imageshack.us/img338/867/36triggerreturnspringpl.jpg)
Removing Springs & Plug
![Image](http://img843.imageshack.us/img843/1619/37removingspringsplug.jpg)
Springs Retainer & Trigger Return Spring Plunger Removed
![Image](http://img687.imageshack.us/img687/73/38springsretainerremove.jpg)
Tools Used To Strip Frame
![Image](http://img412.imageshack.us/img412/7696/39toolsrequiredstripped.jpg)
Parts Removed In Container As Not To Lose Anything
![Image](http://img148.imageshack.us/img148/3809/40partsremovedincontain.jpg)
Slide Assembly
![Image](http://img412.imageshack.us/img412/7808/41slideassembly.jpg)
Removing Recoil Rod & Spring
![Image](http://img707.imageshack.us/img707/6374/42removerecoilrodassemb.jpg)
Remove Barrel
![Image](http://img405.imageshack.us/img405/5381/43removebarrel.jpg)
Levering Out Extractor Toward Ejection Port While Levering Toward The Muzzle
![Image](http://img693.imageshack.us/img693/2397/44leveroutextractortowa.jpg)
Remove Extractor
![Image](http://img163.imageshack.us/img163/7007/45removeextractor.jpg)
Remove RH Side safety Lever, NOTE: Detent & Spring At The Bottom Cover With Finger While Removing Or It Might Fly Away
![Image](http://img46.imageshack.us/img46/9858/46removerhsafetylever.jpg)
RH Safety Removed, NOTE: Detent & Spring Under It
![Image](http://img243.imageshack.us/img243/2463/47rhsafetylevernotedete.jpg)
Turn LH Safety Down 90 Degrees
![Image](http://img202.imageshack.us/img202/6717/48turnlhsafetydown90deg.jpg)
Capture Firing Pin & Return Spring While Removing Safety Lever
![Image](http://img692.imageshack.us/img692/6008/49capturefiringpin.jpg)
Removing Safety & Firing Pin
![Image](http://img266.imageshack.us/img266/508/50removinglhsafetyandfi.jpg)
Slide Parts Removed
![Image](http://img809.imageshack.us/img809/9039/51slidepartsremoved.jpg)
Loosten Rear Sight Allen Set Screw, Turn Counter Clockwise 5/64" Allen Wrench or Hex Bit
![Image](http://img188.imageshack.us/img188/4219/52loosensightallenscrew.jpg)
Allen Screw Removed
![Image](http://img155.imageshack.us/img155/1449/53allenscrewremoved.jpg)
Driving Out rear Sight To The Right, NOTE: Brass End On My Push Tool as Not To Mark Up Sight
As You Remove The Sight NOTE: Firing Pin Safety Spring & Plunger, These Can Easily Be Lost
![Image](http://img39.imageshack.us/img39/3983/54drivingoutrearsight.jpg)
Slide Stripped Except For Front Sight Assembly, The Front Sight Removal Requires That You Drive Out Both 1/16" Roll Pins With A Roll Pin Punch & Then Either Use A Vise Or Vise Grips To Pull The Sight Out Or Tap Slightly With a Brass Punch
![Image](http://img201.imageshack.us/img201/5701/55slidestripped.jpg)
When Reinstalling RH Safety You Must Depress The Dentent & Spring as You Push It Into Place
![Image](http://img163.imageshack.us/img163/9072/56installingrhsafetydet.jpg)
When Installing The Extractor I Found Using a Wooden Dowel Threw the Barrel Hole In The Front Of The Slide The Easiest, Tap Lightly on the Dowel with a Small Hammer Till It Pops Back Into Place
![Image](http://img267.imageshack.us/img267/1163/57installingextractor.jpg)
Checking Firing Pin Protudtion By Pushing on The Firing Pin From The Rear While Pushing The Firing Pin Safety Plunger, You Can Also Check The Firing Pin Safety This Way By Pushing The Firing Pin In as Far as It will go then depress the firing pin safety plunger & it should then allow the firing pin to move forward into the breach face..
![Image](http://img696.imageshack.us/img696/4524/58checkingfiringpinprot.jpg)
Enjoy!! Stay SAFE & Shoot OFTEN!!
Gary aka BerettaPistols/Headknocker
I now have a PDF available of this & it can be sent via email..
[email protected]