Volquartsen MKII/III Assembly Videos
Posted: Wed Aug 09, 2006 9:31 pm
Here are a couple of links to Voquartsen's Quick Time assembly videos for installing their trigger upgrade kits. This is more of an internal parts installation video than one for the VQ upgrade kit.
Mark III assembly video
Mark II assembly video
If one looks closely the Mark III video is just the new internal parts installed into a Mark II frame. Which just goes to show the frames are the same dimensions just the internals are different.
The VQ demonstration assembles things a little differently than I do but they get there all the same.
Notice that the video uses a rubber deadblow hammer to separate the frame and receiver.
NOTE - You'll need the latest version of Quicktime installed to view these video clips.
Enjoy,
R,
Bullseye
Mark III assembly video
Mark II assembly video
If one looks closely the Mark III video is just the new internal parts installed into a Mark II frame. Which just goes to show the frames are the same dimensions just the internals are different.
The VQ demonstration assembles things a little differently than I do but they get there all the same.
Notice that the video uses a rubber deadblow hammer to separate the frame and receiver.
NOTE - You'll need the latest version of Quicktime installed to view these video clips.
Enjoy,
R,
Bullseye