Gentlemen,
The temperatures across the US have been getting hot lately and I figured I would post a trick to help you shoot your rifles quicker, while keeping the barrel cool. This tip will probably only help people who shoot precision bolt rifles, as you cannot do it very well with a semi-auto.
I have noticed a trend on certain forums to try to create some sort of elaborate device to cool barrels to allow you to fire faster and I’ve found that unnecessary. I along with a buddy have started using a washcloth and a bottle of isopropyl alcohol. To cool the barrel apply a liberal amount of alcohol to the rag, and rub on the barrel until the rag has evaporated. I generally pour more on the rag and go back for a second round of rubbing, but it's certainly up to you.
I have found that this will not warp wood stocks, will not harm synthetics, and will cool VERY fast. It cools because it's a liquid, thus the heat dissipation properties are obvious, however it being alcohol when it evaporates it draws heat from the inside of the barrel and brings it out towards the outside for faster dissipation. Another advantage is that it's very cheap, something like 99 cents a bottle at any medication store. A large bottle usually lasts me something like 1-2 months with heavy shootings.
This drastically cuts my shooting times in half, epically when the ambient air temps are around 100+. Just something to think about.
Barrel Cooling Trick
Moderators: Bullseye, Moderators
-
- Regular contributor
- Posts: 216
- Joined: Fri Aug 19, 2005 11:02 pm
- Location: South California
Me too, Bullseye- shuda thought of that, it's so obvious. In fact, I remember that as a kid, my mom would sometimes do the same thing with me or a sibling who's having a temperature: a sponge bath using a face towel dunked in water with rubbing alcohol poured on it, and it WAS refreshing: body temporature would go down in no time at all.
Now I know what to do next time I use my Remington 700 bull barrel in .223_ hopefully, I won't have to wait so long in-between shots.
Now I know what to do next time I use my Remington 700 bull barrel in .223_ hopefully, I won't have to wait so long in-between shots.
A bad shot is often caused by a loose nut behind the buttplate
Well, that's a great tip for those whose rifle barrels are exposed. And I'll remember it the next time I get my 94s hot.
But......
What do you do when your in AZ, out in the sun, in the summer, shooting your milsurp with it's wood covered barrel and in one magazine of shooting (10 rounds) the wood is so hot it's sizzeling the oil out of it?
I don't own any NORMAL bolt guns, just two Enfields. And I can tell you, them buggers get HOT. The barrels under the wood are skinny and they get hot fast and radiate heat like crazy.
What to do?
Joe
But......
What do you do when your in AZ, out in the sun, in the summer, shooting your milsurp with it's wood covered barrel and in one magazine of shooting (10 rounds) the wood is so hot it's sizzeling the oil out of it?
I don't own any NORMAL bolt guns, just two Enfields. And I can tell you, them buggers get HOT. The barrels under the wood are skinny and they get hot fast and radiate heat like crazy.
What to do?
Joe
-
- Regular contributor
- Posts: 216
- Joined: Fri Aug 19, 2005 11:02 pm
- Location: South California
What do you do when your in AZ, out in the sun, in the summer, shooting your milsurp with it's wood covered barrel and in one magazine of shooting (10 rounds) the wood is so hot it's sizzeling the oil out of it?
Arizona in summer!!!
Mere mention makes my skin crinkle!!!
I come from a hot country but never experienced anything like that oven-blast heat in Yuma, AZ last Sept. But the dove shoot more than made up for it.
Arizona in summer!!!
Mere mention makes my skin crinkle!!!
I come from a hot country but never experienced anything like that oven-blast heat in Yuma, AZ last Sept. But the dove shoot more than made up for it.
A bad shot is often caused by a loose nut behind the buttplate
- arizona-hermit
- Regular contributor
- Posts: 204
- Joined: Tue Aug 16, 2005 9:01 am
- Location: The Old Southwest
Shooting in the Heat
I routinely shoot in the AZ 'heat' for many, many hours at a time. Trick is to make your own shade and shoot something that will not overheat
One of these days, I will post pictures of my custom TC Encore .300 Win mag that I have yet to get hot, regardless of round count. Course, the barrel is a 'tad large' and it is a single shot (weighing just under 20 pounds), but running 400-500 rounds thru it in about 6 hours of shooting has yet to elevate the temperature of the metal.
Now, my old Mini-14 was a different story. I could not run thru a 50 round drum without having to set that poor thing in the shade for awhile and let it settle down. The barrel on that was a pencil-type though and it could not dissipate heat worth a plug nickel.
Never have any issues with the MKs or the 10/22s and I crank off many hundreds of rounds per hour out of those little beauties. Sure, the barrels get hot, but nothing to be concerned about.
After all, it's a 'dry heat'.
One of these days, I will post pictures of my custom TC Encore .300 Win mag that I have yet to get hot, regardless of round count. Course, the barrel is a 'tad large' and it is a single shot (weighing just under 20 pounds), but running 400-500 rounds thru it in about 6 hours of shooting has yet to elevate the temperature of the metal.
Now, my old Mini-14 was a different story. I could not run thru a 50 round drum without having to set that poor thing in the shade for awhile and let it settle down. The barrel on that was a pencil-type though and it could not dissipate heat worth a plug nickel.
Never have any issues with the MKs or the 10/22s and I crank off many hundreds of rounds per hour out of those little beauties. Sure, the barrels get hot, but nothing to be concerned about.
After all, it's a 'dry heat'.
But by the grace of God I am what I am, and His grace toward me did not prove vain. [1 COR 15:10a - NASB]