Page 1 of 1
HF Wooden Machinist Chest
Posted: Fri Feb 24, 2012 1:40 pm
by charlesb
The Harbor Freight wooden machinists chest is a good value...
- But if you rub a little Tru-Oil on it, it will look at least twice as good.
It really made a difference on mine.
Posted: Sun Feb 26, 2012 10:17 am
by greener
Posted: Sun Feb 26, 2012 9:23 pm
by charlesb
That's the one I had in mind.
I use mine for machinist tools, but my wife bought one for her hobby tools.
The finish on mine was a bit lackluster. I was walking by with a patch soaked in Tru-Oil one day, heading for the trash can with it, and decided to rub a little onto the chest instead.
It made a noticeable difference, bringing out the shifting 'honey' tones in the wood, and giving it a bit of sheen. Later on, it got another thin coat.
I ended up taking the handle off of the top of mine, so I could lay my little netbook computer or a Kindle on top of it, and view a drawing or reference chart, etc. while I am working with one of the machines. The chest is on a steel roll-away cart, so I can move it around the shop.