Put Mark III back together, can't pull back bolt
Posted: Sun Sep 02, 2007 10:46 pm
As the title says, I put my Mark III back together, but I can't pull the bolt back. I can't get the mainspring housing to come back out.
GunTalk-Online.com
A forum by shooters for all shooting enthusiasts
https://guntalk-online.com/forum/
Put Mark III back together, can't pull back bolt
Page 1 of 1
Posted: Sun Sep 02, 2007 11:00 pm
I figured it out! Step 8 of the reassembly precedure REALLY is the most critical step!! My advice-USE THAT PAGE
Posted: Sun Sep 02, 2007 11:12 pm
Great news Matt. I also have a troubleshooting page for when something goes wrong and one wonders what's next. http://www.guntalk-online.com/TroubleshootingPage.htm step 8 there would have solved it too.
R,
Bullseye
R,
Bullseye
Posted: Fri Sep 14, 2007 7:26 pm
The secret to reassembly is the hammer...If you pay attention to its position you will not have any problems.
Posted: Sat Sep 15, 2007 5:17 pm
You had to let the cat out of the bag didn't you.Average Joe wrote:The secret to reassembly is the hammer...If you pay attention to its position you will not have any problems.
