Page 1 of 1
MK III 22/45 mag safety .....clarify
Posted: Wed Mar 17, 2010 9:41 am
by Morgan
22/45, When "removing the mag safety", I substitute the MK II hammer bushing,then do I replace the sear spring with a MK II spring or just replace the MK III sear spring?
Thanks in advance.
Morgan
Re: MK III 22/45 mag safety .....clarify
Posted: Wed Mar 17, 2010 10:22 am
by oldpal
Morgan wrote:22/45, When "removing the mag safety", I substitute the MK II hammer bushing,then do I replace the sear spring with a MK II spring or just replace the MK III sear spring?
Thanks in advance.
Morgan
No need to mess with the sear spring. Use the 22/45 spring that came with the pistol.
Hugh
Posted: Wed Mar 17, 2010 1:05 pm
by blue68f100
Hammer bushing is all that needs to be changed. The springs do not need to be changed.
Posted: Thu Mar 18, 2010 12:03 am
by Bullseye
Follow this picture:
That's all there is to it!
R,
Bullseye
Posted: Thu Mar 18, 2010 5:28 pm
by Morgan
Thanks for the replys. This website is fantastic for the amount of tech info on the Ruger Mark series. You've made my life easier.
Morgan
Posted: Thu Mar 18, 2010 8:39 pm
by Bullseye
We try to help where ever we can.
R,
Bullseye