Put Mark III back together, can't pull back bolt

Matt_S · Post by **Matt_S** » Sun Sep 02, 2007 10:46 pm

As the title says, I put my Mark III back together, but I can't pull the bolt back. I can't get the mainspring housing to come back out.

Matt_S · Post by **Matt_S** » Sun Sep 02, 2007 11:00 pm

I figured it out! Step 8 of the reassembly precedure REALLY is the most critical step!! My advice-USE THAT PAGE

Post by **Bullseye** » Sun Sep 02, 2007 11:12 pm

Great news Matt. I also have a troubleshooting page for when something goes wrong and one wonders what's next. http://www.guntalk-online.com/TroubleshootingPage.htm step 8 there would have solved it too.

R,
Bullseye

Average Joe · Post by **Average Joe** » Fri Sep 14, 2007 7:26 pm

The secret to reassembly is the hammer...If you pay attention to its position you will not have any problems.

Tbag · Post by **Tbag** » Sat Sep 15, 2007 5:17 pm

Average Joe wrote:The secret to reassembly is the hammer...If you pay attention to its position you will not have any problems.

You had to let the cat out of the bag didn't you.