M-41 trigger problem

Discuss .22 pistols.

Moderators: Bullseye, Moderators

Post Reply
flyfishtom
New member
New member
Posts: 19
Joined: Thu Nov 26, 2009 3:59 pm

M-41 trigger problem

Post by flyfishtom » Tue Jun 08, 2010 8:43 am

My M-41 has developed a quirky trigger. Every once in a while the pull will go to something like twenty pounds. It often happens on the first round of a magazine but can happen at any time. The gun is clean. Any ideas?

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6384
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Tue Jun 08, 2010 4:50 pm

This kind of sounds like the thumb safety is slightly engaging the sear face. You may need to take the left grip off and bend down the little spring clip on the safety lever a little more to make a more positive lock on the lever.

R,
Bullseye
Image

flyfishtom
New member
New member
Posts: 19
Joined: Thu Nov 26, 2009 3:59 pm

Post by flyfishtom » Wed Jun 09, 2010 6:12 pm

Thank you, Bullseye but that didn't cure it. I think you are on the right track though. Everything was fine until I used the safety and then the problem returned.

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6384
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Wed Jun 09, 2010 7:06 pm

On some of these pistols the safety lever doesn't appear to have moved at all but it is just enough to interfere with the sear. Also check your springs on the trigger bar and ensure they aren't weak or broken.

R,
Bullseye
Image

Post Reply