GunTalk-Online.com

I purchased one while traveling through Idaho a while back. It's a well made unit and worked well on a 10-22. Quick target acquisition once one gets used to it. I was surprised how accurate it is.

John

Look at the Sig 522. I have one and it shoots any ammo without any problems and tight groups. Not a cheap feeling piece of junk.

john

22/45 reworked by Majestic Arms with a ultradot and a Beretta 87 (not target) that is a mate to my 86 EDC

Well after a couple of trips to the range and taking things apart I found that I had reassembled the magazine slider button on the wrong side. DUH! O well part of the learning porocess. Thanks again to all who replied

Bullseye et. al. Not sure that it was bent during reassembly. Point of contact between bolt and and bolt catch is pretty thin, that is, not making a lot of contact on both surfaces. I have a friend that has a mark III will compare the two. I was taught not to allow the bolt to slam shut using the fo...

Will mark magazines to see if problem follows. Upon closer examination of the internals ( and using Bullseye's pictures) after disassembly, it looks like the slide catch appears to be bent slightly to the left as viewed from the rear end. This may be the problem and if so I guess I could bend it bac...

Gun is very clean as far as I can tell. Will take it apart today and investigate further.

Thanks

Have a 22/45 that for some reason has recently failed to hold the bolt open on the last shot. Any ideas? Gun is well broken in and very accurate. Thanks