Changing the trigger pull on a MK-III
Posted: Fri Jan 04, 2008 3:41 pm
Can I successfully decrease my trigger pull on a MK III 10/45 by reworking the original factory parts? I do not really want to spend the $100 or more for an accurizing kit. I disassembled the pistol, using bullseye on-line instructions, which by the way were excellent, and polished the seer, hammer and disconector lever. This made for a smoother trigger pull, but still measured 4 lbs on a gauge. I took it apart a second and used a fine stone on the hammer where it lays against the seer and repolished the area. I now have a 3.8 lb. pull. Can I continue this process safely until I wind up with the desired 2.5 lb pull?