Page 1 of 1

TR Sear

Posted: Sat Jan 05, 2013 1:18 pm
by blue68f100
Has anyone any experience with this new way in cutting a 1911 sear.

The concept is very simple and seams to be a bullet proof way of cutting sears. You still need to do the relief cut like you normally do.

Posted: Tue Jan 08, 2013 6:34 am
by Bullseye
I use a PC-1 system. I could see using something like this as a 'go-no go' gauge to check the final length and cut angle of a sear.