Anschutz parts...

The place to discuss the inner workings of firearms.

Moderators: Bullseye, Moderators

Post Reply
Victor_N_TN
New member
New member
Posts: 1
Joined: Sat Jan 07, 2012 3:30 pm
Location: Knoxville, Oak Ridge, TN

Anschutz parts...

Post by Victor_N_TN » Sat Jan 21, 2012 1:14 pm

I know this is probably posted somewhere that I haven't been able to locate. Is there any place in the US that might have an ejector for a model 54 match, 1961 version, single extractor. The rifle shoots very well. But the bolt / receiver are worn enough to let the bolt have some "slop" and movement at the rear of the stroke. About 3 of 20 shots I have to dig the fired brass out with my fingers. This makes any kind of time limited fire very difficult.

Anyone have any ideas?

Thanks in advance.
Victor

User avatar
Hardball
Regular contributor
Regular contributor
Posts: 147
Joined: Fri Sep 16, 2005 2:37 am
Location: Oregon

Post by Hardball » Thu Feb 23, 2012 9:45 pm

Have you asked on Rimfire Central in the Anschutz section?

I have a 1413 Super match about that same age. maybe older

Post Reply