223 load that worked for me

The place to discuss reloading techniques.

Moderators: Bullseye, Moderators

Post Reply
User avatar
charlesb
Master contributor
Master contributor
Posts: 689
Joined: Wed Feb 10, 2010 10:39 pm
Location: Mountains of West Texas

223 load that worked for me

Post by charlesb » Fri Nov 21, 2014 8:29 pm

Trying a new 223 load yesterday, five shots went into .170" (center to center) at 50 yards.

Image

This is what I tried with my Savage model 25T:

Hornady brass, Hornady 68 grain BTHP bullets, CCI BR-4 small rifle benchrest primers, 24.5 grains H4895 has the powder kissing the base of the bullet, but not compressed.

COAL 2.317" put the bullet .019" off of the lands. No crimp was used.

Image

User avatar
bgreenea3
Master contributor
Master contributor
Posts: 1587
Joined: Sun Sep 06, 2009 9:35 pm
Location: SW Michigan

Post by bgreenea3 » Fri Nov 21, 2014 10:42 pm

He 89 is one 9 my favorite rifle powders.... that and varget.
"Courage is being scared to death... and saddling up anyway."

-John Wayne

Post Reply