Bullet Lube

The place to discuss reloading techniques.

Moderators: Bullseye, Moderators

Post Reply
User avatar
bebloomster
Regular contributor
Regular contributor
Posts: 104
Joined: Mon Dec 07, 2009 11:06 pm
Location: Hi Desert, Ca

Bullet Lube

Post by bebloomster » Tue Jun 15, 2010 12:14 am

Those of you that cast your own bullets for bullseye use... just wondering what you use for lube and how well satisfied you are with it.

I've been using "BAC" from White Label Lube on 148gr wadcutters that I cast from scrap wheelweight. I will usually add a pound or two of linotype to each 20 pound pot in an effort to harden it up a little bit more. I size to .358" in a SAECO lubrisizer.

My normal load is 3.1gr W-231 or HP-38. Have never chronographed this load so don't know the exact speed but it is pretty comfortable in both my S&W Model 52-2 and S&W K-38.... certainly not a hot load at all. I still note some light leading in the barrel after 150 rounds or so. Easy enough to remove with a bit of Chore Boy copper scrub pad on a bronze brush.

Just wondering if there might be a better option for lube.

http://www.lsstuff.com/lube/
A day without sunshine is like..... night.

Post Reply