bolt removal for winchester 121

Discuss .22 Rifles.

Moderators: Bullseye, Moderators

Post Reply
derree
New member
New member
Posts: 18
Joined: Fri Jan 02, 2009 4:54 pm
Location: crocker,missouri

bolt removal for winchester 121

Post by derree » Sun Dec 11, 2011 4:38 pm

Cannot figure out how to remove the bolt to disassemble a winchester model 121. I pulled the trigger back but the bolt will not come out.

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6382
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Sun Dec 11, 2011 5:29 pm

As I recall, you have to remove the receiver from the stock. Once you do there's a small lever just in front of the trigger guard that you press forward as you pull the bolt rearward. By moving this lever forward it lowers the ejector which is what is keeping the bolt held in place.

Hope this helps.

R,
Bullseye
Image

derree
New member
New member
Posts: 18
Joined: Fri Jan 02, 2009 4:54 pm
Location: crocker,missouri

Post by derree » Sun Dec 11, 2011 6:12 pm

Thanks a million Bullseye. It works! I sure appreciate the info---you saved the day!

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6382
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Sun Dec 11, 2011 8:28 pm

Glad it is solved for you!

R,
Bullseye
Image

Post Reply