Cleaning Vises???

Discuss .22 Rifles.

Moderators: Bullseye, Moderators

Post Reply
chadflys
Regular contributor
Regular contributor
Posts: 65
Joined: Mon Jan 12, 2009 5:18 pm
Location: Memphis

Cleaning Vises???

Post by chadflys » Mon Sep 21, 2009 12:53 pm

I've never used one, but thinking of getting one maybe Tipton best vise since I have an AR. They look like they would make it much easier to get rods smoothly through and help speed up the process and minimize the chances of damage. Any thoughts or expericence ????

Chad

User avatar
bearandoldman
Ye Loquacious Olde Pharte
Ye Loquacious Olde Pharte
Posts: 4194
Joined: Tue Aug 16, 2005 10:30 am
Location: Mid Michigan

Re: Cleaning Vises???

Post by bearandoldman » Mon Sep 21, 2009 3:04 pm

chadflys wrote:I've never used one, but thinking of getting one maybe Tipton best vise since I have an AR. They look like they would make it much easier to get rods smoothly through and help speed up the process and minimize the chances of damage. Any thoughts or expericence ????

Chad
Have never used one of those specialty vises, for general gun work, I use a medium size bench mounted vise with a set of padded jaws.
You have great day and shoot straight and may the Good Lord smile on you.
Image

KAZ
Master contributor
Master contributor
Posts: 760
Joined: Thu Jul 31, 2008 9:09 pm
Location: Texas

Post by KAZ » Mon Sep 21, 2009 6:58 pm

I believe that Chad is referring to a rifle cleaning station as opposed to a machinist vise. That Tipton looks really good, I think that they are a must have to hold the rifle safely and allow you to assure that the rod goes through the bore guide straight. Also really excellent for scope mounting chores. Regards
Member Marine Corps League
Life Member National Rifle Association
Life Member Texas State Rifle Association

User avatar
bearandoldman
Ye Loquacious Olde Pharte
Ye Loquacious Olde Pharte
Posts: 4194
Joined: Tue Aug 16, 2005 10:30 am
Location: Mid Michigan

Post by bearandoldman » Mon Sep 21, 2009 7:36 pm

KAZ wrote:I believe that Chad is referring to a rifle cleaning station as opposed to a machinist vise. That Tipton looks really good, I think that they are a must have to hold the rifle safely and allow you to assure that the rod goes through the bore guide straight. Also really excellent for scope mounting chores. Regards
I realize that and damn near bought one. My 4-1/2 inch vise is mounted to a 2x6 and can be bolted in several positions on my workbench, and with the padded, 3/8 rubber belting, jaw liners I use it for all kinds of work from cleaning to repair and scope mounting and stock work.
You have great day and shoot straight and may the Good Lord smile on you.
Image

KAZ
Master contributor
Master contributor
Posts: 760
Joined: Thu Jul 31, 2008 9:09 pm
Location: Texas

Post by KAZ » Mon Sep 21, 2009 7:50 pm

Sorry, it was me that misunderstood.
Member Marine Corps League
Life Member National Rifle Association
Life Member Texas State Rifle Association

User avatar
bearandoldman
Ye Loquacious Olde Pharte
Ye Loquacious Olde Pharte
Posts: 4194
Joined: Tue Aug 16, 2005 10:30 am
Location: Mid Michigan

Post by bearandoldman » Mon Sep 21, 2009 8:07 pm

KAZ wrote:Sorry, it was me that misunderstood.
Maybe it was both of us, but then, I do a lot of things different than a normal person at times or at all times, Opinions may vary and will.
You have great day and shoot straight and may the Good Lord smile on you.
Image

KAZ
Master contributor
Master contributor
Posts: 760
Joined: Thu Jul 31, 2008 9:09 pm
Location: Texas

Post by KAZ » Mon Sep 21, 2009 9:27 pm

Well bearandoldman I've learned a lot from you!
Member Marine Corps League
Life Member National Rifle Association
Life Member Texas State Rifle Association

User avatar
bearandoldman
Ye Loquacious Olde Pharte
Ye Loquacious Olde Pharte
Posts: 4194
Joined: Tue Aug 16, 2005 10:30 am
Location: Mid Michigan

Post by bearandoldman » Mon Sep 21, 2009 9:53 pm

KAZ wrote:Well bearandoldman I've learned a lot from you!
I can't take claim for that idea, my local friend/gunsmith/dealer has been in his present location for 46 year and they have a 6 inch vise with the same rubber belting over the jaws on all o their benches, it must be all right. Us it for every thing including cleaning and the gun is never going to move when you have it clamped in.
You have great day and shoot straight and may the Good Lord smile on you.
Image

User avatar
Bullseye
Site Admin/Host
Site Admin/Host
Posts: 6382
Joined: Sun Aug 14, 2005 12:23 pm
Location: USA

Post by Bullseye » Tue Sep 22, 2009 6:46 am

I've used cleaning stands for years, they do make the job a lot easier. They can be as simple as a few pieces of wood screwed together to some of the more modern rigs like the Tipton vise or the MTM Site-n-clean. I still use my thirty year old service rifle cleaning stand I made out of oak.

R,
Bullseye
Image

laportechaarlie
New member
New member
Posts: 36
Joined: Tue Feb 10, 2009 7:25 pm
Location: Laporte, Colorado

Post by laportechaarlie » Thu Sep 24, 2009 3:33 pm

I have one of the older Tipton cleaning stations that I have used for years. Mounted many a scope with it. I recently bought a Tipton "Best" vise because someone had them on sale. I put it togeather but haven't really used it yet. I think it will be a lot better than the old one. Should work well for the AR's and pistols.
Charlie

Post Reply