As many of you have probably reaad my posts, about my 41 having FTE issues. I took Bullseye's advice and used the 22 LR Match Reamer. Here are the results.
I just went to the range again today (11/10/11) and had a great time. Another 150 rounds through the gun today and not a single FTE. That is 350 rounds total with out a failure to Eject after the reamer was used. And for the people that think it would hurt accuracy here is a couple Pictures of a Target the Gun and the rest that I made. I would have one ragged hole but I have to work on my Breathing and trigger squeeze a little more. This gun is so fun to shoot and so accurate I believe I could pick a fly off the paper.
I was firing at 25 yards, 10 rounds ( I will have to build a little longer range) with a 2-7x32 Hi-Lux LER Scope. Using CCI SV. I had a Bushnell scope on it but the eye relief was to far for my short arms. Here the Pictures.
By jstanfield at 2011-12-10
By jstanfield at 2011-12-10
I am not bragging by any means, I just have really fallen in Love with this gun after the reaming job. It worked great!
Thanks Again Bullseye. You and this site are a huge help!
S&W Model 41 Update
Moderators: Bullseye, Moderators
- jstanfield103
- Regular contributor
- Posts: 137
- Joined: Fri Oct 28, 2011 8:03 am
- Location: Kentucky
- blue68f100
- Master contributor
- Posts: 1997
- Joined: Mon May 25, 2009 10:31 pm
- Location: Piney Woods of East Texas
-
- Regular contributor
- Posts: 211
- Joined: Sun Nov 21, 2010 11:37 pm