S&W M41 Extractor

Discuss .22 pistols.

Moderators: Bullseye, Moderators

Post Reply
DeerSpy
Regular contributor
Regular contributor
Posts: 67
Joined: Fri Nov 02, 2007 9:09 pm

S&W M41 Extractor

Post by DeerSpy » Tue Feb 22, 2011 3:17 pm

I have a M41 SN ******* bought new don't remember what year work good till extractor broke about a year ago now I can't get through a 900 match with out at least two or three alibi because empty does not clear gun using CCI SV have tried other ammo same results. I used the maintenance help to
take apart and install new extractor and spring from brownells, have to hone down extractor to fit slot in slide and bolt was to thick.
note I have posted on S&W form also
Looking at new extractor it looks like it is a lot longer than needs to be, I have seen how to fix by using vise punch but know one tells what the gap should be between face of bolt and extractor (mine is .015 measured with feller gauge). does any one know what it should be?

thanks

Post Reply