Posted: Wed Jan 11, 2012 1:20 am
First picture is an RC4 brand slug I see is available
down under. It has locked base like Brenekke.
And locked on without discarding petals, like US-S.
And 2nd picture is a group fired with RC4 slugs
by fellow on NitroExpress forums from a good
double 12ga, 2 left and 2 rights at 25yds.
This shows the possibilities of working with smoothbores,
rather than not trying to make them work.
3rd picture is a discarding sabot base slug, and with
four discarding sabot carriers, with centered
penetrating solid bullet, from France.Ed
In earlier thread I mentioned the long brass 28ga case
we setup. Well here is picture of a revolving 28ga
we will try to get later on and put in heavy barrel
and longer chamber and use brass 28ga cases.Ed
down under. It has locked base like Brenekke.
And locked on without discarding petals, like US-S.
And 2nd picture is a group fired with RC4 slugs
by fellow on NitroExpress forums from a good
double 12ga, 2 left and 2 rights at 25yds.
This shows the possibilities of working with smoothbores,
rather than not trying to make them work.
3rd picture is a discarding sabot base slug, and with
four discarding sabot carriers, with centered
penetrating solid bullet, from France.Ed
In earlier thread I mentioned the long brass 28ga case
we setup. Well here is picture of a revolving 28ga
we will try to get later on and put in heavy barrel
and longer chamber and use brass 28ga cases.Ed