Search found 333 matches
- Thu May 07, 2015 5:28 pm
- Forum: The Workshop
- Topic: Drilling & tapping
- Replies: 7
- Views: 42071
Drilling & tapping
Well, I picked up 2 older MKII's. A 5 1/2" blue and a Stainless 5 1/2" 22/45. As they were older ones neither came drilled & tapped. so I ordered a couple Weigand bases and went to work. thanks for the drilling template Bullseye. I've done a few blued ones over the years, so no issues there. Just be...
- Tue Apr 28, 2015 10:03 am
- Forum: Technical Forum
- Topic: Polishing revolver chambers?
- Replies: 6
- Views: 16474
If it's just built up fouling and lead deposits, just wrap a few strands of ''ALL COPPER'' Chore boy pot scrubber around a used 22 brush. Chuck it into the drill and give each chamber 10-20 seconds at low speed. Keep adding strands if it gets packed into the bristles. Very important to use an all co...
- Wed Apr 22, 2015 9:51 am
- Forum: Miscellaneous
- Topic: cupon
- Replies: 0
- Views: 167924
cupon
I don't remember ever seeing one either. But when I was checking out there was a section for a coupon code. So I figured I'd ask. On the plus side I finally found a MKII stainless 22/45. I've been looking for a good deal on one since taking my blued MKII on a canoe trip...With predictable results. R...
- Tue Apr 21, 2015 5:28 pm
- Forum: Miscellaneous
- Topic: Rimfire Sports coupon
- Replies: 1
- Views: 11656
Rimfire Sports coupon
Getting ready to drop an order to RF sports. Anyone have a coupon number that will work??
Al
Al
- Wed Feb 25, 2015 12:36 pm
- Forum: Rimfire Handguns
- Topic: Wanted: Ruger MKII base
- Replies: 3
- Views: 12143
- Wed Feb 25, 2015 10:48 am
- Forum: Rimfire Handguns
- Topic: Wanted: Ruger MKII base
- Replies: 3
- Views: 12143
Wanted: Ruger MKII base
I thought I'd throw this out there before ordering one. I'm looking for a factory base for the MKII target. I picked up an older one that I intend on putting a Ultra Dot on after I drill & tap it. That way I have a back up for my backups backup. Anyone out there have a base lying around that they do...
- Mon Aug 11, 2014 5:25 pm
- Forum: Rimfire Rifles
- Topic: Barrel Obstruction?
- Replies: 12
- Views: 19633
If it is a ring bulge, and we don't know at this point, the barrel will most likely shoot just fine...Until the cavity that is there fills with carbon and lead deposits, then every subsequent round is bumped, scraped, wedged by the buildup and accuracy goes to pot in a hurry. As long as you keep the...
- Mon Aug 11, 2014 10:12 am
- Forum: Rimfire Rifles
- Topic: Barrel Obstruction?
- Replies: 12
- Views: 19633
Unusual placement for a buildup of anything. Common enough placement for a ring bulge, resulting from a squib load lodging 1/2 way down & the next round slamming into the rear of the lodged 22 slug. These are easy enough to feel with a sporter barrel, but with a heavy barrel more difficult to either...
- Wed Jul 23, 2014 10:13 am
- Forum: Gun Talk Community Forum
- Topic: Lots of 22LR here
- Replies: 4
- Views: 4813
The first 2 cases (Aquila SE stnd velocity) I had were from Cole Distibuting at $119.00 a case, delivered...If I had only known:( The last case I've had a few more issues with. Seems to be a bit underpowered. Either they've changed their velocity or type of powder because it only works with a clean ...
- Thu Jul 10, 2014 5:54 pm
- Forum: Gun Talk Community Forum
- Topic: Army wants to replace the 9mm
- Replies: 9
- Views: 9351
- Thu Jul 10, 2014 11:23 am
- Forum: Gun Talk Community Forum
- Topic: Army wants to replace the 9mm
- Replies: 9
- Views: 9351
I have to agree with the way the M9 never fit. Long before I took up shooting the 1911 (1999) the M9 just never felt right. You know what I mean, some pistols you pick up and they just feel right. Others feel like a 2x4 and never get better. The 1911 was one of those that just felt right every time ...
- Wed Jun 25, 2014 5:22 pm
- Forum: Gun Talk Community Forum
- Topic: Good Calipers?
- Replies: 9
- Views: 8529
- Sat Jun 14, 2014 3:30 pm
- Forum: Rifle Forum
- Topic: Range Rpt Savage 16 7mm-08
- Replies: 17
- Views: 29730
I hear what you're saying. Back when I didn't care about recoil, I loved the 338 WM. You could eat right up to the bullet hole. Flash forward to a few years ago, I used a Tikka in 223 with 60 partitians for my whitetail. Never would be my first choice, but I was going in the next week for rotator cu...
- Thu Jun 12, 2014 10:01 am
- Forum: Rifle Forum
- Topic: Range Rpt Savage 16 7mm-08
- Replies: 17
- Views: 29730
Charles, If you haven't already, look at the 120 Ballistic tip. My deer hunting bud shoots a Tikka in 708 and I shoot a Rem 700 in 708 Imp. While I could never get the 120 to shoot out of mine, it shot really well in both his 708 and 7 Rem Mag. I witnessed him take a whitetail doe lying in a harvest...
- Wed Jun 11, 2014 12:29 pm
- Forum: Rifle Forum
- Topic: Range Rpt Savage 16 7mm-08
- Replies: 17
- Views: 29730