Search found 1587 matches
- Tue Nov 17, 2009 2:22 pm
- Forum: Rimfire Handguns
- Topic: All installed..wow
- Replies: 19
- Views: 13189
This mk II is a tac driver. It likes cci mini-mags and eleys. the scope is a 2x LER with a duplex cross hairs. Friend of mine has one with a red dot and I personnaly like the 2x scope better. I try to shoot irons only on my 22's but i've been thinkin' a scope or a dot might be fun too....I might ha...
- Tue Nov 17, 2009 2:15 pm
- Forum: Handgun Forum
- Topic: Ruger Blackhawk Convertable
- Replies: 58
- Views: 36772
The .45 convertible is a much better idea than the .357/9mm convertible. Accuracy falls off significantly pushing the 9mm down the .358" dia barrel. 9mm bullets are marginally smaller than 38/357 but its enough to muck up the accuracy....if you can load your own 9mm with .357 bullets accuracy shoul...
- Fri Nov 13, 2009 1:18 pm
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
I should have worked the trigger since it was in pieces for almost 2 weeks... but it was good to begin with I was just tearing it down a bit to clean powder residue/gunk that had gathered there for the last 5 years of shooting it... and I wanted to try out some dry lube on the trgger group to see if...
- Fri Nov 13, 2009 1:12 pm
- Forum: Rimfire Handguns
- Topic: All installed..wow
- Replies: 19
- Views: 13189
- Thu Nov 12, 2009 5:13 pm
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
- Thu Nov 12, 2009 2:19 pm
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
Got the spring from ruger and it was the right one this time.....(They sent me 2 just in case) +1 for great service from them.... dropped in the spring and everything worked just as it should, I guess i am now an "expert" at dissassembly/reassembly of the trigger group....since it works and i didn't...
- Wed Nov 11, 2009 1:41 pm
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
bearandoldman wrote:If it ain't broke it is easier to fix, unless you break it trying to fix it or launch small parts into unknown places.Hakaman wrote:What makes this statement funny is that it is most of the time true.You are probably right, but half the fun is fixing stuff that ain't broke.
haka
- Fri Nov 06, 2009 11:27 am
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
- Fri Nov 06, 2009 11:23 am
- Forum: Shotgun Forum
- Topic: Waterlogged Mossey
- Replies: 6
- Views: 14672
- Thu Nov 05, 2009 10:24 pm
- Forum: Shotgun Forum
- Topic: Waterlogged Mossey
- Replies: 6
- Views: 14672
Waterlogged Mossey
I'm a diver on my local Dive Rescue Team/ Today I pulled a Mossberg 835 Ulti-Mag shot gun off the bottom of a lake. It's owner's son had lost it in 10 feet of water about a month ago when he flipped his canoe while setting decoys. I pulled the shotgun out of water check the chamber worked the slide ...
- Thu Nov 05, 2009 10:13 pm
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
- Wed Nov 04, 2009 11:53 pm
- Forum: Handgun Forum
- Topic: Dirty word!!!! Dirty word!!! Dirty word!!!!
- Replies: 11
- Views: 9645
- Wed Nov 04, 2009 9:51 pm
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
Well I took it all apart and re-fit everthing about 4 more times and no luck :? ... So I then noticed on the exploded diagram / parts list / invoice from Ruger that the cylinder latch Spring and the pawl spring were the same part # and that would make me believe that they should be the Same length.....
- Wed Nov 04, 2009 4:07 am
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
- Tue Nov 03, 2009 12:51 pm
- Forum: Technical Forum
- Topic: Gp100 trigger group problem
- Replies: 24
- Views: 21946
Gp100 trigger group problem
So I removed the trigger group from my gp100 to do a good cleaning on it (de-crud and relube), my pawl plunger and spring launched and are now somewhare in my basement never to be heard of again. I called ruger they sent me new ones over the weekend :D +1 for service! I installed the little bugger a...