GunTalk-Online.com

I got ejection port milled and beveled and it does not bend cases now, but the new extractor is making a little mark on bevel of the case not sure why I put old extractor back in it does not mark cases. Is there a way to hone the extractor to make it through lower?

got a new bolt from Gil Hebards it has a little better fit but still moves forward and aft about .009 of inch, looks like the only way to make it tight would be to clamp it in and line ream then put a over size pin in.
have you ever heard of doing that?

S&W M41 ultra dot, 25 yards indoor

slow fire 86-3X
timed 92-2X
rapid 92-2X
total 270-7X

Thanks Bullseye I will give Gil call

I put a new extractor and a extended ejector in and a over size firing pin stop and just tried it to see what would happen. It bent the cases but did not hit bottom of red dot, so I will lower ejection port next week.

the replacement pin was from S&W I due have calipers, but think i better get a new bolt, when I put the pin in it pushes the bolt forward .003 with out firing pin spring in and then it will move another .010 forward due to hole in bolt is way to big. I have had this gun for about 25 or 30 years can'...

put the colt back together and shot it to day it now bends cases think it hitting on ejection port, I have not lowered port yet. checked depth of chamber on barrel it measured .900 deep and cases measured .884 to .887 long so when barrel is lock up the case can float .013 to .016 forward and aft whe...

the pin that holds bolt in broke i put new one in and noticed that the bolt is lose in slide it slides forward and aft about .012 of inch is this right or do I need a new bolt, or is there a fix?

at the last show I went to I picked up a used ultra dot 4 dot for 75$ but it did not come with rings bought some at show for 16$ put it on HS Victor now if I could just find some magazines for Victor.

I have put a new extractor in and over size firing pin stop old one was lose and extractor was clocking, also put a long ejector in, have not got to machine shop yet to mill port. have another ? while doing above work and using a empty case with barrel installed in slide I noticed that the case was ...

thanks Bullseye for info on how much to cut out of port.

I put a redot on my 1911 series 70 and have ejection problems from what I have been reading I might need to tune extractor and lower ejection port
how much can you take off of port an still be safe?

I have a M41 SN ******* bought new don't remember what year work good till extractor broke about a year ago now I can't get through a 900 match with out at least two or three alibi because empty does not clear gun using CCI SV have tried other ammo same results. I used the maintenance help to take a...

there should be more sites like this one it is great to member, I have learned a great deal from this form

HAPPY BIRTHDAY

thanks for all the help Bullseye, and thanks to all who post.

I will see how good I can do, when shooting PPC we shot 15 rounds at 7 yards, 15 rounds at 15 yards, and 20 rounds at 25 yards in side two handed. and at my average score was 492 out of 500. but one hand at 50 yards will be different game I have been doing a lot of reading here and on bullseye-list ...