Search found 4 matches
- Thu Jul 03, 2014 9:34 pm
- Forum: Rimfire Handguns
- Topic: Ruger Mark III 22/45 Extended Mag release
- Replies: 1
- Views: 3901
Ruger Mark III 22/45 Extended Mag release
How do you remove the old magazine release so you can replace it with a extended magazine release
- Tue Oct 08, 2013 7:19 pm
- Forum: Technical Forum
- Topic: LC9 Trigger not resetting
- Replies: 3
- Views: 10368
Thanks Bullseye
Cleaned out plunger in slide with Gun Scrubber, the second time, it was gummed up.
I had installed a Belt Clip (See Below Link) if you tighten the allen set screw too tight it causes a reset problem.
http://www.amazon.com/gp/product/B008AD ... UTF8&psc=1
Cleaned out plunger in slide with Gun Scrubber, the second time, it was gummed up.
I had installed a Belt Clip (See Below Link) if you tighten the allen set screw too tight it causes a reset problem.
http://www.amazon.com/gp/product/B008AD ... UTF8&psc=1
- Tue Oct 08, 2013 2:59 pm
- Forum: The Workshop
- Topic: Ruger Vaquero problems
- Replies: 1
- Views: 9041
New Vaquaro VZ Original (Old Model)
The New Vaquaro indexes to line up with the loading gate old model did not and installing the Free Spin Pawl let them spin backwards.
On the old model the Pawl has to be modified to do the free spin.
Go to Cowboys Acting Web sites for advise
http://www.sassnet.com
On the old model the Pawl has to be modified to do the free spin.
Go to Cowboys Acting Web sites for advise
http://www.sassnet.com
- Tue Oct 08, 2013 7:42 am
- Forum: Technical Forum
- Topic: LC9 Trigger not resetting
- Replies: 3
- Views: 10368
LC9 Trigger not resetting
New LCP requires me to pull trigger back at least 1/2 way then release trigger and then pull to fire.
When I take the slide off and cock the hammer with my thumb it fires correctly but when I put slide back on, the trigger will not reset with out pulling it and releasing it.
Any ideas?
When I take the slide off and cock the hammer with my thumb it fires correctly but when I put slide back on, the trigger will not reset with out pulling it and releasing it.
Any ideas?