Search found 71 matches

by hubel585
Thu Sep 24, 2015 9:01 am
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Sorry to be away so long, health, getting old, and interruptions. Here is picture of a lightweight Barnes bullet in 24ga FH. Guys cut the back off of 750gr bullet off to get 500gr weight. http://www.gunownerstv.com/24litebarnes.jpg Here is picture 58 cal Minie slug that's little long on the side for...
by hubel585
Fri Jun 26, 2015 4:29 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

The 12ga FH isn't the first wildcat case built on BMG brass, it was preceded by target rounds like the necked down 338 Talbot, the cut off 700 DKT for big game, necked down to .416 and . 458, and more, but the following one was way before them, in my favorite rifle caliber, for .585" bullets. One of...
by hubel585
Wed Apr 22, 2015 8:20 am
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Here is picture of our NEF 12ga FH with Hogue Compstock. It has the recoiling cam and springs in the hollow butt plus some weght, http://www.gunownerstv.com/compstock12.jpg Here is a variety of slugs and bullets that fit in the 12ga dangerous game slug, lock on sabot. BPI sells that DG slug. . http:...
by hubel585
Sat Feb 14, 2015 11:13 am
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

For lightweight plinking, deer hunting, etc, in 585HE as well as 24ga FH here is picture of 58cal Hornady sabot that holds .451/.452" light bullets 225 to 300 gr. A way to shoot targets economically. Low recoil but a big bang and satisfaction. A 250 gr bullet would go about mach 4 with a top load.. ...
by hubel585
Fri Dec 19, 2014 10:30 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Guys asking about using 585 CEB bullet in our 12ga super sabot. Here is picture, We just took off the bottom band and couple middle bands on the CEB and it fit perfect in our 12ga sabot, which uses .575" slugs. Hollowpoint one pictured 700gr in the sabot loaded in brass case. Can be used in plastic ...
by hubel585
Sat Oct 25, 2014 1:30 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Here is picture of 585HE 100 cases loaded, CEB solid nose bullets and hollowpoints. This bullet is a turned solid with wide meplat or wide hollowpoint. . http://www.gunownerstv.com/100ceb.jpg Here is picture of triball loads that fellows like for deer and hogs, and just general tear em up fun, with ...
by hubel585
Wed Sep 10, 2014 1:52 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

First AUS buffalo killed by 585HE. By Tankhunter with his Ruger #1. If you use closeup on picture, you see loaded round on the buffs hide next to the 585HE Ruger #1.... A nice heavy barreled gun..Ed http://www.gunownerstv.com/tankbuff.jpg I put the 585 in a Savage 112, lots of room lengthwise, figur...
by hubel585
Tue Aug 19, 2014 8:21 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Family has a computer, electronics, etc, recycling/repair business and I got a bunch of them. Just setting in a pail, and I tried some in hollow stock and worked great. So I stopped the peeling off of the rubber for steel balls for slingshots, and now save them all for weight. Find recycling places/...
by hubel585
Sun Aug 17, 2014 2:01 am
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Finally got back to forums.Been busy with 24ga FH and 585HE and getting 585HE cases made, as many as possible... We are now working a bit with 24ga FH and here is picture of it with our 585HE case. Both use same bullets/slugs, same bore barrels. Main use difference, 24ga FH easy setup in break actio...
by hubel585
Wed Apr 23, 2014 9:23 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Here is picture of 24ga cases, loads; and some slugs and seals. Brass cases are 3", plastic cases are 2.5". Brass 3" can be loaded to match 577NE power. http://www.gunownerstv.com/24galoads.jpg Here is of 24ga in an 87 Win, just test gun of mine. Uses same barrels as our 585HE, This one has slow twi...
by hubel585
Thu Mar 13, 2014 10:24 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Here is good simple system with big hollowbase slugs to stop the skirts from deforming, or wads getting pushed into the hollow base. I found that dense dow foam works good, I was using glue gun, but the dense foam is easier, cut plugs out of foam sheet and force into the base. Make it a tight fit, u...
by hubel585
Sun Feb 23, 2014 4:24 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Some guys in 12ga like to use the Magtech brass cases but the cases being brass the sides are thinner than plastic, and that makes loose fit in 12ga chambers. And cases expand a lot with heavier loaded slug loads, are harder to resize, wear out quicker. But I found that .750 hollowbase 10ga slug fit...
by hubel585
Tue Jan 28, 2014 2:05 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Here is picture of 24ga FH in the Mossberg bolt gun. On a Mossy 390 frame, .585" heavy barrel, same as 24ga size. Chamber is set up 3" with shotgun style forcing cone, so it can use 2.5" plastic cases and 2.5" Magtech brass cases with slugs or shot and for 3" cases we use 577NE 3" brass. Really make...
by hubel585
Wed Jan 01, 2014 7:02 pm
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Another use for 58cal Minie Bullets would be to setup a 24ga FH. Minie bullets cheap to cast and buy. We use the .575-.577" in our 12ga sabot, and the .585-.587 in my 585HE. And you could use 577 NE bullets also. For those in shotgun only areas there is a way. You can get 2.5" Magtech brass cases, b...
by hubel585
Mon Dec 09, 2013 12:39 am
Forum: Miscellaneous
Topic: 12ga,10ga,8ga,4ga FH; 585HE, 700HE; Other Big bores--
Replies: 78
Views: 814514

Here is picture of the group improvement a guy had shooting our sabots in a real tight barrel. Actually an undersize barrel compared to Savage and Nef barrels. Had a wide open group with shotgun powder but made it much smaller using much more of the slower 4759. http://www.gunownerstv.com/sabimp.jpg...