Search found 1995 matches

by blue68f100
Fri Jun 22, 2018 7:08 pm
Forum: Gun Talk Community Forum
Topic: Thank you
Replies: 1
Views: 462

Re: Thank you

All the thanks goes to Bullseye, the owner/operator and a Gunsmith by trade.

Welcome back. Its been pretty slow lately.
by blue68f100
Sat Jun 02, 2018 9:28 am
Forum: Miscellaneous
Topic: 45 caliber sizes
Replies: 6
Views: 856

Re: 45 caliber sizes

Where the dia causes problems is when the throats on the cylinder are smaller than the forcing cone. As long as they will pass through you should not have a leading problem. Using too hard of a bullet can cause a leading problem when not pushing them hard enough to seal. The small throats reduce the...
by blue68f100
Sat May 26, 2018 1:14 pm
Forum: Miscellaneous
Topic: 45 caliber sizes
Replies: 6
Views: 856

Re: 45 caliber sizes

That makes it easy, Shoot them in the 45 Colt :guns:
by blue68f100
Thu May 17, 2018 7:51 pm
Forum: Miscellaneous
Topic: 45 caliber sizes
Replies: 6
Views: 856

Re: 45 caliber sizes

The 250gr is too heavy for the 45acp, though some have worked up loads for it. Load data is scarce.
by blue68f100
Sun Mar 04, 2018 8:25 am
Forum: Miscellaneous
Topic: Bullseye powder
Replies: 6
Views: 892

Re: Bullseye powder

BE burns very dirty. I also use WST for my plinking and BE loads. I had some one at the range ask me what I was using because he new I shot 200 rounds and my SS pistol was cleaner than his after 1 magazine. He was using Unique which i dislike due to its poor metering properties. WST is a ball powder...
by blue68f100
Mon Dec 25, 2017 8:29 am
Forum: Gun Talk Community Forum
Topic: Merry Christmas
Replies: 3
Views: 516

Re: Merry Christmas

I would like to wish every one a Merry Christmas and a Happy New Year.
by blue68f100
Wed Nov 08, 2017 9:00 am
Forum: Miscellaneous
Topic: Lost my carry gun
Replies: 4
Views: 707

Re: Lost my carry gun

Glad you were able to locate your gun after being mia for over a month. Handguns worry me the most when they get into the wrong hands. I keep a pretty short leash on the ones I have. Safes are a nice place to store guns but they have their drawbacks too. There never big enough it seams like. I helpe...
by blue68f100
Tue Aug 22, 2017 8:13 am
Forum: Gun Talk Community Forum
Topic: Still hanging on
Replies: 10
Views: 1522

Re: Still hanging on

They are bad every where in Texas. All you need to do is look at all the agriculture land they tear up on a regular basis. They do not stay in one area very long as they are constantly moving. They cover a lot of ground, 2-3 miles. There is shooting around me every night. My neighbor has an FLIR set...
by blue68f100
Fri Aug 18, 2017 8:51 am
Forum: The Reloading Bench
Topic: Win 296 light load
Replies: 5
Views: 1536

Re: Win 296 light load

W296/H110 does not download well at all and gets very spikey when done. This powder was designed for full power loads for the Magnums and 30 carbine. Use a different powder if you want reduced loads. TB is good as well as a few others. Most powders will be very dirty when down loaded.
by blue68f100
Fri Aug 18, 2017 8:46 am
Forum: Gun Talk Community Forum
Topic: Still hanging on
Replies: 10
Views: 1522

Re: Still hanging on

With most of getting older I've slowed down for sure. A few other boards I visit are very slow too. Maybe 1 post a week. For me I've been busy in my new shop. Finished up a barrel for my AR and been testing it out. I've had to tweak the chamber free bore in order for some of my ammo to chamber. I th...
by blue68f100
Tue May 30, 2017 8:24 am
Forum: The Workshop
Topic: Expanded my work shop with some new equipment
Replies: 6
Views: 2344

Re: Expanded my work shop with some new equipment

Yes, I have full range of travel with about 1 extra foot at each end. When I first moved it in I had it centered on that end, but discovered that I wasted too much valuable wall space, so I decided to move it to one side. It was a big job on moving it into the shop, a couple of neighbors helped me. ...
by blue68f100
Tue May 16, 2017 1:27 pm
Forum: Rimfire Handguns
Topic: Mystery Scratch
Replies: 5
Views: 1377

Re: Mystery Scratch

I don't think it will be a problem.

Wondered if something happened to the RS assembly causing it to move out of position.
by blue68f100
Fri May 12, 2017 8:07 am
Forum: The Workshop
Topic: Expanded my work shop with some new equipment
Replies: 6
Views: 2344

Re: Expanded my work shop with some new equipment

As long as you don't sell it it's legal, for personal use. You have to put a SN on it for sale. That's why there is market for 80% receivers. I can buy a completed receiver cheaper than I can a 80% one.
by blue68f100
Mon May 08, 2017 7:27 pm
Forum: The Workshop
Topic: Expanded my work shop with some new equipment
Replies: 6
Views: 2344

Re: Expanded my work shop with some new equipment

This knee bend mill sure beats the tabletop model I had when I built my 1911. I'm planning on making a few more, now that I have some good equipment. I'm also getting into turning rifle blanks and building them out. :D
by blue68f100
Tue May 02, 2017 9:40 pm
Forum: The Workshop
Topic: Expanded my work shop with some new equipment
Replies: 6
Views: 2344

Expanded my work shop with some new equipment

I added some new equipment to my shop this last month. Now I get to build me some new toys. :D http://i1242.photobucket.com/albums/gg538/Blue68F100/Shop/IMG_0794.jpg and a Lathe to go alone with the mill. http://i1242.photobucket.com/albums/gg538/Blue68F100/Shop/IMG_0792.jpg Still working on getting...

Go to advanced search