GunTalk-Online.com

Thanks again so much Bullseye for the responses. I looked into the firing pin stop theory, It does not fall out when the bolt is shaken it moves slightly when I press on it with my finger nail. Its tight but not perfect, should I maybe put some antisieze or grease on it to hold it in place? I can no...

Thanks again for all the info people. Just to give you abit of an update, I had looked the enitre gun over and could not see what was holding it up. I had tapped with a rubber mallot and was able to break it free. I have had it apart and looked it over good, there is no damage to it what so ever. I ...

Thank you Bullseye, and others for the reply. The good news is that the hammer pivot pin has NOT come out of the frame causing damge to the frame,its still as should be but after looking the pistol over, I do agree the pistol maybe partialy cocked as there is maybe a 1/16 of an inch gap between the ...

Ok people I really need your help, And I know you are excellent with your .22's Bullseye as I have seen you post on several Ruger sites, So I thought I would post here. I have a MKIII 22/45 with over 4k round through it, and have assembled and disassemble alot, so I know its not me doing something w...